Shopping Cart(0)

E3C252D4ID2

ModelE3C252D4ID2

Deep mini-ITX (6.7" x 8.2")

Supports Intel® Xeon® E-2300 and 10th Gen Intel® Pentium® series processors

4 DIMM slots (2DPC), supports ECC/non-ECC UDIMM

1 PCIe4.0 x16

1 OCuLink (PCIe3.0 x2 or 4 SATA 6Gb/s), 1 OCuLink (2 SATA 6Gb/s)

IPMI

立即查詢

Specification

Physical Status
Form Factor Deep mini-ITX
Dimensions 6.7" x 8.2"
Processor System
CPU Supports Intel® Xeon® E-2300 and 10th Gen Intel® Pentium® series processors
Socket Single Socket H5 (LGA1200)
Thermal Design Power 95W
Chipset Intel® C252
System Memory
Supported DIMM Quantity 4 DIMM slots (2DPC)
Supported Type DDR4 288-pin ECC/non-ECC UDIMM
Max. Capacity per DIMM 32GB
Max. DIMM Frequency

3200MT/s*

*Up to DDR4 2666MT/s when installing 10th Gen Intel® Pentium® Series Processors
Voltage 1.2V
PCIe Expansion Slots (SLOT7 close to CPU)
PCIe x 16

SLOT7: PCIe4.0* x16 [CPU]

*SLOT7 supports PCIe3.0 only when installing 10th Gen Intel® Pentium® Series Processors
Other PCIe Expansion Connectors
M.2 slot

1 M-key* (PCIe4.0 x4); support 2280 form factor [CPU]

1 M-key (PCIe3.0 x4); support 2280 form factor [PCH]

*M.2 from CPU will not fuction when installing 10th Gen Intel® Pentium® Series Processors
OCuLink

1 OCuLink (PCIe3.0 x2 or 4 SATA 6Gb/s) [PCH]

1 OCuLink (2 SATA 6Gb/s) [PCH]
SATA/SAS Storage
PCH Built-in Storage

Intel® C252 (Up to 6 SATA 6Gb/s; RAID 0/1/5/10):

2 OCuLink
Ethernet
Additional GbE Controller 2 RJ45 (1GbE) by Intel® i210
Server Management
BMC Controller ASPEED AST2500: iKVM, vMedia support
IPMI Dedicated GLAN 1 RJ45 Dedicated IPMI LAN port by Realtek RTL8211E
Graphics
Controller

ASPEED AST2500:

1 DB15 (VGA)
Rear I/O
UID Button/LED 1 UID button w/ LED
VGA Port 1 DB15 (VGA)
USB 3.2 Gen1 Port 2 Type A (USB3.2 Gen1)
RJ45 2 RJ45(1GbE), 1 dedicated IPMI
Internal Connector/Headers
Power Connector 1 (4-pin, ATX PSU signal) w/ ATX 24-pin adapter cable, 1 (8-pin, ATX 12V) support 12V DC-in
Other Power Connectors 1 (4-pin) for HDD power when using 12V DC-in power source
Auxiliary Panel Header 1 (9-pin): chassis intrusion, system fault LED, LAN1/LAN2 activity LED, locate
System Panel 1 (9-pin): power switch, reset switch, system power LED, HDD activity LED
COM Header 1
Fan Header 3 (4-pin)
Thermal Sensor Header 1
TPM Header 1 (13-pin, SPI)
SGPIO Header 1
SMBus header 1
PMBus header 1
IPMB Header 1
Clear CMOS 1 (contact pads)
Others 1 NC-SI, 1 UID header
USB 3.2 (Gen1) Header 1 (19-pin, 2 USB3.2 Gen1)
LED Indicators
Standby PWR LED 5vsb 1
Fan Fail LED 3
BMC heartbeat LED 1
System BIOS
BIOS Type AMI 256Mb SPI Flash ROM
BIOS Features

Plug and Play(PnP), ACPI 6.2 and above compliance wake up events, SMBIOS 3.3 and above,

ASRock Rack Instant Flash
Hardware Monitor
Temperature CPU, PCH, MB, Card side Temperature Sensing
Fan

Fan Tachometer

CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU Temperature)

Fan Multi-Speed Control
Voltage VCORE, VCCSA, VCCM, 3V, 5V, 12V, +1.05V_PCH_AUX, +BAT, 3VSB, 5VSB, VCCIO, +2.5V_VPP
Environment
Temperature Operation temperature: 10°C ~ 35°C / Non operation temperature: -40°C ~ 70°C
Humidity Non operation humidity: 20% ~ 90% ( Non condensing)
Model E3C252D4ID2